Diamonds
Purple Diamonds
The Very Highest Quality Diamonds...
Diamonds

Diamonds
Purple Diamonds
Diamonds


Diamonds

Clarity


Clarity is possibly the most important of the factors affecting the quality and price of any diamond. Diamonds of all colours can be very attractive. Diamonds of all different cuts look good, and not many diamonds are very badly proportioned.
Extremes of clarity can produce a brilliant magnificent diamond, or a dead, dull, and lifeless stone. Clarity is also sometimes called purity. The fact that clarity is also sometimes called quality shows the importance of this factor.
Clarity literally means "clearness" rather than lack of inclusions, and refers to the diamond's ability to allow the free passage of light without obstruction or absorption. Any inclusions, cleavages, cracks, or other natural features inside or defects on the surface will stop light from passing through the stone.

Clarity or Colour?

Although clarity is an important factor for all diamonds, it as not quite as important in fancy coloured diamonds, where the colour is far more important than any other consideration. While is is sensible to avoid a cloudy or dull-looking stone, it is not necessary to insist on Internally Flawless, VVS or any other high clarity grade. Intensity and purity of colour are far more important than clarity when buying any coloured gemstone including purple diamonds.

What Are Inclusions?
Geologically, an inclusion is "a solid fragment, liquid globule, or pocket of gas enclosed in a mineral or rock."
In gemmology, this definition is usually extended to include any other feature of the gemstone which impedes the free passage of light through the stone. This includes changes in crystal growth direction (e.g. twinning), and external features, such as fissures which run from the surface into the stone, naats , trigons, and zones of colour absorption (e.g. the very common colour banding seen in sapphire).

Are All Inclusions Visible?
No, not all inclusions are visible either with the naked eye, or under the standard 10 times magnification used by gemmologists. Many consumers believe that inclusions are things which are visible to the naked eye, and that if no inclusions can be seen, then the stone is perfect. Some stones contain many areas of "twinning", where the growth direction of the crystal has changed during its formation, and these areas can absorb or refract light in such a manner as to reduce the brilliance of the stone. Other stones contain large numbers of small inclusions, some visible under 10x magnification, others not, because they are too small. These clouds of microscopic inclusions can reduce the passage of light through a stone so severely that the stone looks "dead", with no brilliance or fire whatsoever. Such stones usually have a slightly cloudy look to the naked eye.

What Are Carbon Spots?
A common belief, shared by some jewellery shop staff, is that any black marks visible in diamonds are composed of carbon. Diamonds are composed purely of carbon. While it is possible that some inclusions may be of graphite, the commonest form of carbon, or amorphous carbon, such inclusions are quite rare. Dark inclusions in diamond can include other diamonds, olivine, garnet, diopside, pyrrhotite, pentlandite, pyrite, ilmenite, rutile, silica, bronzite, spinel, serpentine, biotite, phlogopite, chlorite, calcite, haematite, goethite, and iron oxides.

Grading Standards
In recent decades, the GIA, Gemmological Institute of America, has influenced other gemstone grading bodies, such as CIBJO, throughout the world, and most countries now use the same standards as the GIA for diamond clarity, so that the GIA scale has become virtually an international standard. There still remain vast differences between commercial grading and laboratory grading.
De Beers supply leaflets and showcards for diamond clarity grading, but as their aim is undoubtedly to increase demand for higher quality diamonds at higher prices, the De Beers charts contain some distortion. They typically graphically represent the higher grade bands as wider than the lower grades, whereas in reality it should be the other way round, and the grades below P3 are not even mentioned, as though they do not exist.
We present the following table of diamond clarity grades:-

GIAUK / CIBJODescriptionClarityOur Comments
IFLoupe CleanInternally FlawlessInternally Flawless
VVS1VVS1Very Very Small InclusionsNo Visible Inclusions
VVS2VVS2Very Very Small InclusionsNo Visible Inclusions
VS1VS1Very Small InclusionsNo Visible Inclusions
VS2VS2Very Small InclusionsNo Visible Inclusions
SI1SI1Small InclusionsNo Visible Inclusions
SI2SI2Small InclusionsNo Visible Inclusions
I1P1 - Piqué1SI3Barely Visible Inclusions
I1P1 - Piqué1First PiquéBarely Visible Inclusions
I2P2 - Piqué2Second PiquéEasily Visible Inclusions
I3P3 - Piqué3Third PiquéVery Easily Visible Inclusions
  SpottedHeavily Included
  Heavily SpottedVery Heavily Included
  RejectionNear Gem

Comments On Our Chart
The clarity bands from IF to VS could be described as unnecessarily good, or luxury grades. In these grades, diamonds suffer no noticeable loss of brilliance through lack of clarity. Any diamond in these grades should be very bright and sparkly. Inclusions are difficult to see when using a 10x magnification in good light, and are not visible to the naked eye.
In SI1 and SI2, the same comments apply, except that the inclusions are fairly easy to see under 10x magnification, and there may be some, barely discernable lack of brilliance.
SI3 is a relatively recently invented grade. It is not recognised by the GIA or any other laboratory, but is in fairly common commercial use, and is intended to imply that the diamond is better than P1, but logically, it means that the diamond is below SI2, and therefore should apply to stones which are almost SI2. We include it in our table because it does have practical use.
Diamonds which fall into the Piqué bracket have inclusions which are visible to the naked eye. In our opinion, the dividing line between SI2 and P1 is a very important one. The word Piqué is French, and means "pricked".
In P1 stones the inclusions should be difficult to see, or very minor.
P2 stones would have inclusions which were more easily seen. P3 stones would have very easily visible inclusion.
All stones graded P1 to P3 should still be bright and attractive.
Laboratories are not often asked to grade diamonds lower than P3, so they do not have grades below P3. There are many attractive and valuable diamonds which fall into lower grades, and the traditional terms for these are shown. Diamonds described as "Spotted" or "Heavily Spotted" can be expected to have more, or larger, inclusions than those graded P3, but will still retain some brilliance, and be reasonably attractive.
Diamonds falling into the "Rejection" or "Near Gem" category will have very limited, if any, brilliance, and could be considered as "fun" diamonds. They have little commercial value, and often sell for less than their cutting cost.
The blank "Clarity" column is reserved for a graphical representation which will follow shortly.




32 - 36 Harrowside, Blackpool, Lancashire, FY4 1RJ, England.
Telephone (44) - (0) 1253 - 343081| Fax 408058 | E-mail: Contact Us

Diamonds